LAIZHOU ANLUBAO AUTO PARTS(AUTOMOBILE FITTING)CO.,LTD.
網(wǎng)址:work2stay.com
固定電話:0535-2833777
地址:Tushan Town, Laizhou, Yantai, Shandong, China
First to check for brake pads is pure accessories (products), product packaging integrity, anti-counterfeit marking and packing marks on the brake pads are consistent, whether the product model and content of the certificate of approval. Before lifting the vehicle, should first open covering of holding brake oil, tyre loose screws should be diagonal. If using a simple support jack, jack should be ready, and reinforcement is not to replace the wheels of the brake pads. Will tire off, fastening screws loosen the clamp body, and check the screw, clamp sliding guide rod, remove the sediment and the oil, and lubricating oil on maintenance. Old brake pads will be removed, check the wear of brake disc, whether the groove groove. Serious wear and tear (unilateral deep 3 mm) should replace the brake disc, the period of 80000-120000 kilometers, or you will speed up the new replacement brake pad wear, and braking direction jitter, braking force is too small.
It is worth noting: install the new brake pads should distinguish between inside and outside, to the brake disc, brake pad friction surface should be make the blanks with appropriate. Fine accessories, tighten clamp body. Application in fastening clamp devices for tools or special tools to clamp the plug on the back, in order to install the clamp in place. If need to replace the brake pads on the drum brake suggestion to professional repair shop please professional operation, to avoid some mistakes.
After installed the brake should reset the tires. When installing tire screw, should diagonal tightened, so that is conducive to protect the tyre and brake hub. At the same time, also check on the edge of the tread and wear is normal, best left and right two rounds of regularly changing can be used, it will be beneficial to prolong the service life of tires. Finally, you also need to check the brake fluid. Brake fluid should be replaced periodically, add, at the same time should ensure that the brand of brake fluid used is consistent with the original brand of brake fluid, that will help clean up dirt brake line in the sludge, the brake is more sensitive. If a different type of brake fluid mixing, chemical changes will happen, sludge and inorganic salt deposit on the braking system, accumulate over a long period, can clog pipe, causing brake failure, unimaginable consequences.
Before driving off normal brakes applied force empty, until feel brake has return to steadfast to ideal state, can normal drove off normal at this time.